Home Archived February 20, 2019

Link to USGS home page
Sound Waves Monthly Newsletter - Coastal Science and Research News from Across the USGS
Home || Sections: Spotlight on Sandy | Fieldwork | Research | Outreach | Meetings | Awards | Staff & Center News | Publications || Archives



Deep-Sea Instrument Tripod Passes Test in Monterey Bay, California—Next Stop is South China Sea

in this issue:
 previous story | next story

A deepwater tripod system designed by the U.S. Geological Survey (USGS) will be the first of its kind to be deployed on the bottom of the South China Sea at depths approaching 3,000 meters (10,000 feet). Instruments mounted on the tripod will gather data to help scientists better understand how and where deep-seafloor sediment moves and accumulates. Such knowledge can be applied in deep waters adjacent to the United States as well, to determine where contaminated sediment is likely to accumulate, for example, or to choose favorable sites for undersea cables and other infrastructure.

Deepwater tripod on deck
Deepwater tripod suspended from a crane
Above: New USGS deepwater tripod, called the free-ascending tripod, or FAT. A, Sitting on the Santa Cruz Municipal Wharf in Santa Cruz, California, [larger version] and B, suspended from a crane before being lowered into water [larger version]. Some of the instruments mounted on the tripod have been labeled. USGS photographs taken February 6, 2013, by George Tate.

The free-ascending tripod, or FAT, was designed by George Tate, head of the Marine Facility (MarFac) of the USGS Pacific Coastal and Marine Science Center in Santa Cruz, California. Tate and engineering technician Peter Harkins built the tripod at MarFac, and on February 6, 2013, a team from the science center—Tate, Harkins, Hank Chezar, Joanne Ferreira, Kurt Rosenberger, and Jingping Xu—tested the new system at the Santa Cruz Municipal Wharf. The tripod passed with flying colors, clearing it for use later this year in the project “In-Situ Observation of Bottom Currents and Sediment Transport in the Northeastern South China Sea,” a study co-sponsored by the USGS and Tongji University (see related Sound Waves story "Chinese Scientist Visiting USGS Pacific Coastal and Marine Science Center"). The project is funded by the National Natural Science Foundation of China (NSFC). USGS participation is headed by Jingping Xu.

USGS personnel adding pieces of syntactic foam to tripod
Above: USGS personnel adding pieces of syntactic foam (composed of glass microspheres embedded in resin) that will provide buoyancy to raise the tripod to the surface for recovery. Left to right: Jingping Xu, Hank Chezar, Kurt Rosenberger, and Peter Harkins. USGS photograph taken February 6, 2013, by George Tate. [larger version]

Project scientists working in the South China Sea will collect current and sediment data in the layer of water just above the seafloor—called the “bottom boundary layer”—at depths of 2,000 meters (6,500 feet) to 3,000 meters (10,000 feet). In the bottom boundary layer, sediment and biological particles on the seafloor interact with the near-bed currents, a process that determines why and how these particles are resuspended into the water column or deposited and accumulated on the seafloor. The scientists aim to better understand (1) bottom-boundary-layer processes and (2) the circulation of near-bed currents in the deep basin of the region. These currents are thought to hold the keys to understanding the source, transport, and deposition of the deep-sea sediment and the evolution of the basin-scale sediment deposits. Using a platform that sits on the bottom, like the new deepwater tripod, is the most efficient way to collect near-seabed data continuously for a long period of time.

Site map in the South China Sea, and a seismic-reflection profile
Above: A, Sites in South China Sea where the USGS deepwater tripod and about a dozen moorings will collect data to shed light on sediment movement and accumulation on the seafloor. Red dots, sites of instrumented platforms. Green triangles, sites of Ocean Drilling Program (ODP) boreholes. Long-dashed yellow line, hypothesized route of deep contour-following current entering from the Pacific Ocean. Short-dashed yellow line, hypothesized alternative route of deep current from the Pacific. B, Seismic-reflection profile along line a–b on map, showing sediment layers in an apparent contourite (deposited by contour currents). Simplified drawings indicate where scientists intend to place the tripod (TJ-A-2) and several moorings (TJ-A-1, TJ-A-3, TJ-A-4). C, Enlarged map of line c–d, showing sites (red dots) where groups of moorings will be placed along the axis of a submarine canyon (Formosa Canyon). [larger version]

The new tripod is a stainless-steel frame approximately 2 meters (6.5 feet) tall, with a triangular base about 4 meters (13 feet) on a side. It weighs approximately 900 kilograms (nearly 2,000 pounds) in air and has a deployed buoyant weight of about 110 kilograms (240 pounds). The tripod carries a suite of acoustic (sound-based) and optical (light-based) instruments for measuring current velocity, temperature, and sediment concentration in the bottom boundary layer. Many of the instruments make simultaneous measurements at different heights above the seafloor, creating vertical “profiles” of the properties being measured. A high-definition camera system takes photographs of the ocean floor to record variations over time in seafloor morphology (shape) and bioturbation (mixing of seafloor sediment by burrowing organisms).

The tripod, now lacking its footpads, has been lifted out of the water after rising by itself to the surface
Above: Success! The tripod, now lacking its footpads, has been lifted out of the water after rising by itself to the surface (note slack winch line in inset photograph). USGS photographs taken February 6, 2013, by Jingping Xu. [larger version]

What makes the new tripod unusual is the mechanism for raising it from the deep seafloor to the surface so that the data it has collected can be recovered. Similar tripods used to collect bottom-boundary-layer data in relatively shallow water on the continental shelf are fitted with buoys attached to a coiled recovery line. An acoustic (sound) signal sent from a vessel at the sea surface triggers the release of the buoys, which rise to the surface pulling one end of the recovery line with them. Scientists can then motor to the buoys, attach the recovery line to a winch cable, and pull the tripod off the bottom and onto the deck. Such release systems are limited to a maximum depth of approximately 200 meters (650 feet). Because of this limitation, current measurements in the deep ocean are typically collected by instruments attached to a long mooring—a line with a large flotation package at the surface and a heavy anchor at the seabed. The heavy anchor makes unobstructed near-bed flow measurements extremely difficult. Tripods permit more open flow near the seabed, and so the USGS team developed a system for recovering a tripod from the deep seafloor.

Rather than buoys that pull a recovery line to the surface, the new USGS tripod is fitted with buoyant material that raises the entire tripod to the surface—hence the name free-ascending tripod. The tripod’s recovery buoyancy is provided by hydrodynamic pieces of syntactic foam (a moldable material made of glass microspheres embedded in resin) that surround the instrument bay in the upper section of the tripod. The anchor weight is provided by the three low-profile lead-and-stainless-steel footpads at the ends of the legs. The footpads are attached by high-strength fiber rope to a pair of redundant acoustic releases in the instrument bay. (Ideally, both of these devices will respond to a release command sent from the vessel, but the tripod will be freed for ascent even if only one of them works.) The rope supplies tension to a locking mechanism at the end of each leg that keeps the footpad firmly attached to the leg. When an acoustic command is sent from a vessel at the surface, the tension on the rope slackens, the locking mechanism releases, and the tripod detaches from the footpads, which remain at the seafloor. The syntactic foam provides nearly 300 kilograms (about 650 pounds) of buoyancy, which raises the tripod to the surface for recovery. The release coupling employs an innovative, simplified design developed specifically for the new tripod (see diagram below).

Ball-lock release sequence for releasing tripod leg from footpad Left: Ball-lock release sequence for releasing tripod leg from footpad. A, Five stainless-steel balls (greenish blue in this diagram) fit into holes in the footpad coupling cone (gray), which is welded to the footpad. In the locked position, these balls are trapped between the groove in the release shuttle (blue) and the wall of the leg shaft (gray). Tension in the high-strength fiber rope (brown) attached to the release shuttle keeps the footpad coupling cone and attached footpad from separating from the tripod leg. B, An acoustic signal from the surface activates a transponder that releases tension in the rope, allowing the tripod legs to begin to rise via lift provided by the syntactic foam on the upper frame of the tripod. Slack in the rope allows the release shuttle to rest on the footpad while the leg shaft rises. The footpad coupling cone holds the balls in place between the release shuttle groove and the leg shaft as they slide along the interior surface of the leg shaft. C, As the tripod leg continues to rise, the balls reach the level of the enlarged radius at the base of the leg shaft, allowing for sideways movement. D, When there is no more slack in the rope, the release shuttle rises with the leg and the balls are pushed outward by the slanted groove in the shuttle. E, The balls have fallen out of the holes in the footpad coupling cone. Free of the heavy footpads, the tripod will continue rising until it reaches the surface. [larger version]

When deployed, the USGS deepwater tripod will join a dozen or so moorings to form the largest field campaign ever conducted for deep-sea sediment-transport research in the South China Sea. The results are expected to improve understanding of factors that influence sedimentation in the region, including:

  • distribution of near-bottom ocean currents in the study area,
  • turbidity currents and the mechanisms that trigger them,
  • processes that determine whether particles in the bottom boundary layer remain suspended in the water or settle on the seafloor, and
  • sources and pathways of the bottom sediment that has accumulated in the study area.

Knowledge gained from the research can be applied in practical ways; examples include siting of deep-sea cables and other infrastructure; assessment of hazards related to submarine landslides, including tsunamis; and determination of whether and where polluted sediments are likely to accumulate on the deep seafloor.

For more information, contact Jingping Xu, jpx@usgs.gov, or George Tate, gtate@usgs.gov.

Related Sound Waves Stories
Chinese Scientist Visiting USGS Pacific Coastal and Marine Science Center
May / June 2012

Related Websites
Tongji University
Tongji University
National Natural Science Foundation of China
National Natural Science Foundation of China

in this issue:
 previous story | next story


Mailing List:

print this issue print this issue

in this issue:

cover story:
Deepwater Gas Hydrate Deposits in the Gulf of Mexico

Deep-Sea Tripod System to be Deployed in South China Sea

Research New Reports Assess Probability of Hurricane-Induced Coastal Change

Weight-Based Approach to Measuring Coral Growth

California Mallard Ducks Surf for Food

Outreach Inspiring Girls To Pursue Careers in STEM

Meeting to Coordinate USGS Data Management to Support Ocean Planning

Mike Field Receives Distinguished Service Award

Publications Gene Shinn Writes Bootstrap Geologist—My Life in Science

July / Aug. Publications

Accessibility FOIA Privacy Policies and Notices

Take Pride in America logo USA.gov logo U.S. Department of the Interior | U.S. Geological Survey
URL: http://soundwaves.usgs.gov/2013/08/fieldwork2.html
Page Contact Information: Feedback
Page Last Modified: December 02, 2016 @ 12:09 PM